Compaq windows 7 recovery.HP and Compaq Desktop PCs – Recovering the System after the Hard Drive is Replaced (Windows 7)
Creating Recovery discs from Windows.Compaq CQ56 laptop windows 7 recovery process fails because RM – Microsoft Community
1: Create a set of recovery discs or a recovery DVD Some HP and Compaq computers have recovery CD creator software that can create a recovery disc set or DVD. To see if your computer has Recovery Creator software, click Start, All Programs, Hewlett-Packard or Compaq, and then HP Pavilion PC Tools or Compaq Presario PC Tools. There are 3 types of recovery you can perform on a Compaq computer with Windows 7 installed: System Recovery; Factory Reset; Minimized Image Recovery. This is available certain models of HP netbooks. If you can boot into Windows 7. If you don’t have the recovery software provided by Compaq or HP, download our recovery and repair disk for Compaq or HP computers. If you can boot into Windows 7, follow these steps to perform a restore Estimated Reading Time: 7 mins. Recovery from the Windows 7 desktop screen. Turn off the computer. Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove any recently Turn on the computer. Click Start, click All Programs, click Recovery.
Compaq windows 7 recovery.How to Create Windows 7 Recovery USB Drive Effortlessly? (2 Ways)
The recovery window automatically starts; wait for the onscreen instructions to display, and then follow the instructions: If your PC hard disk is blank or corrupted, press R to perform a full system recovery. Insert the remaining CDs when directed. 1: Create a set of recovery discs or a recovery DVD Some HP and Compaq computers have recovery CD creator software that can create a recovery disc set or DVD. To see if your computer has Recovery Creator software, click Start, All Programs, Hewlett-Packard or Compaq, and then HP Pavilion PC Tools or Compaq Presario PC Tools. Click Compaq, click Compaq PC Tools, and then click Recovery CD Creator When first opening the recovery CD-DVD creator program, a Welcome screen and Readme screen describe the operation of the software. Click the Continue button on each screen to start the disc creation process.
HP and Compaq Desktop PCs – Creating the Recovery Disc Set (Windows XP)
Recovery from the Windows 7 desktop screen
HP and Compaq Desktop PCs – Creating the Recovery Disc Set (Windows XP) | HP® Customer Support
HP and Compaq Desktop PCs – Obtaining Recovery Discs
Step 1: Verifying hard drive detection
How to Create a Recovery Disc in Windows 7 (with Pictures)
Last Updated: October 22, To create this article, 17 people, some anonymous, worked to edit and improve it over time. This article has been viewed , times. Learn more If you’ve encountered serious problems with your Windows 7 computer, or just want a fresh start, you’ll need a recovery or installation disc.
A Windows installation disc will allow you to reformat your computer and reinstall a fresh copy of Windows 7. Some computer manufacturers allow you to create recovery discs, which will restore Windows with all of the essential drivers already installed. If you can’t create one of these, you can create your own custom installation disc that contains the drivers and programs you need. Log in Social login does not work in incognito and private browsers.
You can use the product key that came with your computer to reinstall Windows. The Windows 7 installation disc does not contain any drivers for your specific computer, but you’ll be able to download the drivers from the manufacturer’s website.
You’ll be able to use this disc on any computer as long as you have a valid product key. If you want to create a recovery disc that contains all of the necessary drivers for your computer, see the next section. Find your product key. In order to create an installation disc, you’ll need your Windows 7 product key. If you purchased a prebuilt computer or laptop, you can usually find the product key printed on a sticker affixed to the bottom of your laptop or on the back of your tower.
It may be included with your computer’s documentation. If you purchased Windows 7 from a store, the key will be in the DVD case or in your confirmation email.
If you can’t find the sticker, download ProduKey from NirSoft for free here. Unzip the file and run the program. Your Windows product key will be displayed in the ProduKey window. Visit the Windows 7 download site. Microsoft allows you to download the Windows 7 disc image file, or “ISO,” as long as you have your product key. You can download Windows 7 from Microsoft here. Download the Windows 7 ISO file.
You’ll need to verify your product key and then download the correct version. The download is several gigabytes large, and may take a while to complete.
You can download the program for free from Microsoft here. Windows 7 is traditionally put onto a blank DVD, but you can also use a USB thumb drive, which is great for computers without a disc drive. The thumb drive will need to be at least 4 GB, and all of the data on it will be deleted. Browse your computer to find the ISO file that you downloaded. It will usually be in your Downloads folder. Follow the prompts to create the disc or USB drive. This may take a little while to complete.
Once the process is finished, you’ll have a fully-functional Windows 7 installation disc. Method 2 of Create a disc using the tool included by your computer’s manufacturer. Major computer manufacturers such as HP, Dell, and Acer include programs in Windows that allow you to create recovery discs. If you built your own computer, or your manufacturer didn’t include recovery disc creation tools, move on to the next step to make your own. You may not need all four. Click the Start button and type “recovery manager.
Select the media type that you want to create. Follow the prompts to create the discs. If you are burning the recovery discs, you’ll be prompted when to insert the next blank disc. Make sure you label the discs as you create them so you know which order they go in. Click “Backup” and select “Create Recovery Media. When you select one, you will be told how many discs you need or how large the USB drive will need to be.
Follow the prompts to create your discs or USB drive. Label each of the discs as you create them so they don’t get out of order. You will need two blank discs. Follow the prompts to create the recovery discs. Label them so that they don’t get out of order. In order to create your own disc that contains all of the drivers you need for your computer, you’ll need either an ISO file for the Windows 7 installation disc, or an actual installation disc. You’ll need your product key in order to download it.
See the first section of this article for details. You can create a new folder on your desktop and then just select and drag all of the files from the disc or ISO into it. To open an ISO file, you’ll need either 7-Zip 7-zip. Once installed, right-click on the ISO file and select “Extract. Download and install the Windows Automated Installation Kit. This program is required in order to build your own Windows installation disc.
You can download it for free from Microsoft here. The file is about 1. Download and install NTLite. This program was designed by the Windows enthusiast community to make creating an installation disc much easier.
You can download NTLite for free from nliteos. You can leave all of the installation settings at their defaults. You’ll see your Windows 7 version appear in the “Source list. Double-click the Windows 7 version in the Source list. Convert the files into an image file if prompted.
This will likely take a while to complete. Select the “Drivers” section of the menu. NTLite allows you to incorporate drivers into the installation, so that you don’t have to worry about reinstalling them after recovery. On the right side of the window, you’ll see a list of all the drivers that will be automatically included. Make note of the drivers that say “Missing. Download all of the “Missing” drivers for your computer from the manufacturer’s website.
If you have the Premium version, you can simply import the drivers from your current computer by clicking “Import host. Visit the support page for your computer and search for your computer’s model number. If you built the computer yourself, you’ll need to visit the Support page for each of your components. Download all of the “Missing” driver files from the Drivers or Downloads section.
Place all of your downloaded files into a single folder. Click the “Add” button in the “Drivers” section. Select “Folder with multiple drivers” and then browse for the folder that contains all of the driver files that you want to add to your installation. This will add all of the INF format files. Select the “Post-Setup” section and click “Add.